MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Scanning problem solved
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I tested my Robot Star with Provia 400X slide film, but the strips turned out to be very convex, too convex for scanning with my 4990. When I put a strip on the scanner with the convex side down, the strip touched the glass bed. When I put it with the convex side up, the result was like this, first a 100% crop at 4800dpi, which would correspond to an about 25 Mpixel FF:



and the whole frame down-sampled and refocused:



which really didn't look very promising. After some thought I decided to get an ANR Insert for 35mm film from Betterscanning, see http://www.betterscanning.com/scanning/insert35.html. I got the insert on Friday and tested it to-day. The results look like this, first the crop:



and the down-sampled and refocused frame:



Not quite at the 5D level but certainly usable. Problem solved Smile

Veijo


Reply

I would say that the result is much more than "acceptable".
Thanks for sharing!.

Jes.


Reply

A clever way to solve your problem - and solved it is! Well done.