| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Ven Mai 17, 2013 1:39 pm Sujet du message: How to make large format camera? |
|
 Posté: Ven Mai 17, 2013 1:39 pm Sujet du message: How to make large format camera? |
|
|
philslizzy wrote:
Ok I'm interested in having a go at large format photography. I have seen plans galore on how to make a camera so thats not too much of a problem. I also have a shutter and a couple of lenses suitable for at least 5x4. So I'm set there. So for the front end I'm ok. Focusing screen sorted too.
Film holders, what do I need? And is designing the camera from the back to the front the best way to go about it?
I see plate holders on ebay for a variety of cameras made of both wood and metal.
Are they ok?
Is there a standard 'fitting'?
How can I attach them to my camera? _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
mmelvis
 Inscrit le: 24 Mai 2010 Messages: 1326 Localisation: Florida,USA
Expire: 2015-05-09
|
 Posté: Ven Mai 17, 2013 6:19 pm Sujet du message: |
|
 Posté: Ven Mai 17, 2013 6:19 pm Sujet du message: |
|
|
mmelvis wrote:
You can pickup a back like this on ebay or a local used camera store
Cliquez ici pour voir sur Ebay
Cliquez ici pour voir sur Ebay
Film holders like this
Cliquez ici pour voir sur Ebay
Cliquez ici pour voir sur Ebay
If you watch ebay and are patient you can get a complete 4x5 camera for less than $100 US.
Cliquez ici pour voir sur Ebay
Also be sure to look around over at http://www.largeformatphotography.info/ sometimes you can get a great deal there
(edit) I've had to re-format the ebay links - please make use of the ebay item number buttons made available for that purpose, else it makes a mess of the page.
Mod Farside.
Thank you for the note, I will use the ebay button next time
Dernière modification par mmelvis le Sam Mai 18, 2013 1:16 am ; modifié 1 fois au total |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Ven Mai 17, 2013 6:23 pm Sujet du message: |
|
 Posté: Ven Mai 17, 2013 6:23 pm Sujet du message: |
|
|
Farside wrote:
What we know as the Graflex film holder became (indeed, was already - I have a 100yr old cycle camera that uses it) a de-facto standard for 5x4, so you won't go wrong using that. I suspect it originated with Kodak in the times when they took over Graflex.
Rite-Way, Linhof, Graflex, Fidelity all made them and you can often find them at reasonable prices, for a few bucks each. There's the usual lottery of how good and light-tight they are, of course. From what I gather, you're as well to avoid the original wooden Graflex holders - warping, light leaks and pain.
To build a film holder back is really simple - once you've established your film plane, you measure what you need to surround it with (wooden moulding, for example) and hold the holder in place with rubber bands, at its simplest.
You could pick up a Graflex spring back or splash out a bit more for a Graflok back to make it much easier.
Doddle really; the rest is just a box. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
dan_
 Inscrit le: 05 Déc 2012 Messages: 1070 Localisation: Romania
Expire: 2016-12-19
|
 Posté: Ven Mai 17, 2013 9:17 pm Sujet du message: |
|
 Posté: Ven Mai 17, 2013 9:17 pm Sujet du message: |
|
|
dan_ wrote:
Or you can use the Grafmatic film holders with 6 sheets of film:
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1311.R1.TR5.TRC1&_nkw=grafmatic&_sacat=0&_from=R40
They cost more but you don't have to change the holder for every picture you make. |
|
| Haut de page |
|
 |
kendo1
 Inscrit le: 07 Déc 2012 Messages: 171 Localisation: Edinburgh
|
 Posté: Ven Mai 17, 2013 9:58 pm Sujet du message: |
|
 Posté: Ven Mai 17, 2013 9:58 pm Sujet du message: |
|
|
kendo1 wrote:
I have an old folder that I'll have to look out. It was my granddad's.
Maybe someone here could make use of it?
I'll post some pics of it tomorrow. |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Sam Mai 18, 2013 10:18 am Sujet du message: |
|
 Posté: Sam Mai 18, 2013 10:18 am Sujet du message: |
|
|
iangreenhalgh1 wrote:
9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Sam Mai 18, 2013 4:06 pm Sujet du message: |
|
 Posté: Sam Mai 18, 2013 4:06 pm Sujet du message: |
|
|
philslizzy wrote:
| iangreenhalgh1 a écrit: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
9x12 inches or cm?
edit: I picked this up today from Real Camera, a Fidelity Astra double film holder 4x5 So perhaps this can be my basis. There are more in the shop for £10 each which looks like the going rate.
photo taken with a Photax 35mm f2.8 on my NEX. Soft at full aperture. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Dim Mai 19, 2013 12:14 pm Sujet du message: |
|
 Posté: Dim Mai 19, 2013 12:14 pm Sujet du message: |
|
|
Farside wrote:
| iangreenhalgh1 a écrit: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
The over-priced greedy bstards have latched onto them now; but it's still possible to pick one up for cheap. Anything with Voigtlander on it has rocketed, if the seller knows what it is. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
mmelvis
 Inscrit le: 24 Mai 2010 Messages: 1326 Localisation: Florida,USA
Expire: 2015-05-09
|
 Posté: Mer Mai 22, 2013 12:53 am Sujet du message: |
|
 Posté: Mer Mai 22, 2013 12:53 am Sujet du message: |
|
|
mmelvis wrote:
| philslizzy a écrit: |
| iangreenhalgh1 a écrit: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
9x12 inches or cm?
edit: I picked this up today from Real Camera, a Fidelity Astra double film holder 4x5 So perhaps this can be my basis. There are more in the shop for £10 each which looks like the going rate.
photo taken with a Photax 35mm f2.8 on my NEX. Soft at full aperture. |
Great start to getting your 4x5 kit going |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Jeu Mai 23, 2013 11:32 am Sujet du message: |
|
 Posté: Jeu Mai 23, 2013 11:32 am Sujet du message: |
|
|
philslizzy wrote:
Focusing screen is simple. I was told by many that some abrasive paste over clear plastic is the way to do it. I think not!!
Laminate sheets, unlaminated make a lovely focus screen show fine detail. Naturally They would have to be attached to something firmer, like glass or perspex. Although I expect you could find heavy duty stuff thet will work on its own.
 _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Jeu Mai 23, 2013 3:03 pm Sujet du message: |
|
 Posté: Jeu Mai 23, 2013 3:03 pm Sujet du message: |
|
|
iangreenhalgh1 wrote:
I meant 9x12cm. I have an Ernemann Heag II I need to restore, go all the bits, just not had the patience to do it yet.
That's a good tip Phil. When I needed a ground glass for an experiment, I took the plastic from an old CD case and rubbed it with the finest emery paper I had, works okay, I could focus with it. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Ven Mai 24, 2013 10:54 am Sujet du message: |
|
 Posté: Ven Mai 24, 2013 10:54 am Sujet du message: |
|
|
philslizzy wrote:
I have an old 118 Kodak somewhere, I wonder if a conversion could be done??
But I did want to make my own camera from scratch.
Re using laminate as a screen its a little floppy, it would be good sandwiched between two sheets of clear acrylic - such as cd covers. Thanks for your tip Ian!! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
ZoneV
 Inscrit le: 09 Nov 2009 Messages: 1633 Localisation: Germany
Expire: 2011-12-02
|
 Posté: Ven Mai 31, 2013 4:41 pm Sujet du message: |
|
 Posté: Ven Mai 31, 2013 4:41 pm Sujet du message: |
|
|
ZoneV wrote:
I have some links to largeformat tinkering on my photo-tinkering-link-page, please scroll down to the bottom of the page.
I grinded a mate screen, made tests with a hydrofluoric acid solution, but this acid is devilish. Avoid it! _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Sam Juin 01, 2013 10:34 am Sujet du message: |
|
 Posté: Sam Juin 01, 2013 10:34 am Sujet du message: |
|
|
philslizzy wrote:
| ZoneV a écrit: |
I have some links to largeformat tinkering on my photo-tinkering-link-page, please scroll down to the bottom of the page.
I grinded a mate screen, made tests with a hydrofluoric acid solution, but this acid is devilish. Avoid it! |
Anyone interested in Hydrofluoric acid can get it at Dental Depots but collect only as its dangerous. Very dangerous, can cause nerve damage even when 'washed off'
Use laminate sheets its safer. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Sam Juin 01, 2013 11:50 pm Sujet du message: |
|
 Posté: Sam Juin 01, 2013 11:50 pm Sujet du message: |
|
|
Farside wrote:
There's absolutely no need to acid etch anyway. If you want to use glass just get some carborundum paste of various sizes, or even some emery paper and grind on... _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
dan_
 Inscrit le: 05 Déc 2012 Messages: 1070 Localisation: Romania
Expire: 2016-12-19
|
 Posté: Dim Juin 02, 2013 1:36 pm Sujet du message: |
|
 Posté: Dim Juin 02, 2013 1:36 pm Sujet du message: |
|
|
dan_ wrote:
| Farside a écrit: |
| There's absolutely no need to acid etch anyway. If you want to use glass just get some carborundum paste of various sizes, or even some emery paper and grind on... |
An article about how to make it yourself:
http://www.apug.org/forums/forum216/78392-making-ground-glass-focus-screen.html
And you can buy what you need really cheap:
http://www.ebay.com/itm/diy-GROUND-GLASS-FOCUS-SCREEN-for-large-format-cameras-/350799051440?pt=UK_Replacement_Parts_Film_Camera_Parts&hash=item51ad40bab0
If you are interested I have somewhere a Toyo 4x5 Revolving Graflok Spring Back in very good shape that I could sell for cheap (let's say 25 Euros+shipping). I've got it some time ago for a DIY project but finally I've used a Linhof back instead.
It looks like this one but is missing the ground glass:
http://www.ebay.com/itm/4x5-Toyo-View-Revolving-Graflok-Spring-Back-w-Ground-Glass-for-45AII-45F-45GII-/151039727026?pt=US_Film_Backs_Holders&hash=item232aab55b2 |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Dim Juin 02, 2013 6:56 pm Sujet du message: |
|
 Posté: Dim Juin 02, 2013 6:56 pm Sujet du message: |
|
|
philslizzy wrote:
as I said, laminate sheet is perfect. No grinding, no chemicals. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
David
 Inscrit le: 13 Avr 2011 Messages: 1869 Localisation: Denver, Colorado
Expire: 2013-01-25
|
 Posté: Jeu Août 29, 2013 1:24 am Sujet du message: |
|
 Posté: Jeu Août 29, 2013 1:24 am Sujet du message: |
|
|
David wrote:
_________________ http://www.youtube.com/user/hancockDavidM |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Jeu Août 29, 2013 11:34 am Sujet du message: |
|
 Posté: Jeu Août 29, 2013 11:34 am Sujet du message: |
|
|
philslizzy wrote:
ooh whats happened here? My message space is empty like David's. OK removed David's quotes and it shows. Weird. PM sent to Attila _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Jeu Août 29, 2013 6:44 pm Sujet du message: |
|
 Posté: Jeu Août 29, 2013 6:44 pm Sujet du message: |
|
|
Lloydy wrote:
Why paint it? that looks wonderful as it is. Just imaging the looks of envy from the guys with big white lenses.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Jeu Août 29, 2013 10:55 pm Sujet du message: |
|
 Posté: Jeu Août 29, 2013 10:55 pm Sujet du message: |
|
|
philslizzy wrote:
| Lloydy a écrit: |
Why paint it? that looks wonderful as it is. Just imaging the looks of envy from the guys with big white lenses.  |
yeah right!!!! envy ok.
I'm embarrassed showing it here to you guys who I know will tell me its wonderful and well done for an amazing job . it will need some serious work before I take it outside. But I will do it. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Jeu Août 29, 2013 11:00 pm Sujet du message: |
|
 Posté: Jeu Août 29, 2013 11:00 pm Sujet du message: |
|
|
Lloydy wrote:
Function before style, it's a winner everytime. It's the Series 1 Land Rover of cameras.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
mmelvis
 Inscrit le: 24 Mai 2010 Messages: 1326 Localisation: Florida,USA
Expire: 2015-05-09
|
 Posté: Ven Août 30, 2013 12:24 am Sujet du message: |
|
 Posté: Ven Août 30, 2013 12:24 am Sujet du message: |
|
|
mmelvis wrote:
| Lloydy a écrit: |
Function before style, it's a winner everytime. It's the Series 1 Land Rover of cameras.  |
Well stated |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Ven Août 30, 2013 12:35 am Sujet du message: |
|
 Posté: Ven Août 30, 2013 12:35 am Sujet du message: |
|
|
iangreenhalgh1 wrote:
It's coming together nicely. As long as it's light tight, who cares about looks. Decent lens/shutter is important too and looks like you have that covered.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
|
|