MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

One of my favs from my second roll from my first home dev
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I recently posted a shot from my first roll from my very first home dev of b&w film. Well my tank can do two rolls at once so that is what I did. Here is one of my favorite shots from that second roll.
Shot with my Minolta Himatic 9 on Kentmere 400 developed in old expired Kodak T-Max developer.

I have a bit of the story behind that roll with the rest of the pics here if you are interested in checking it out:
http://joshpereraphoto.metalforfishes.com/?p=2246


Reply

I checked out your essay. You've managed some quite contrasty photos. Especially given the expired nature of your developer. It would appear that, even though it's expired, this additional time hasn't affected it negatively. Or did you dial in some more time during developing to take the developer's expired condition into account?


Reply

Great stories behind the great photos. Thanks!

I may look at C41 myself.


Reply

cooltouch a écrit:
I checked out your essay. You've managed some quite contrasty photos. Especially given the expired nature of your developer. It would appear that, even though it's expired, this additional time hasn't affected it negatively. Or did you dial in some more time during developing to take the developer's expired condition into account?


No I actually didn't dial in any more time actually. The developer had been sealed right up until I went to dev these. It just seems that it has actually aged well. I really like the results from this developer compared to results I have achieved with my mate who taught me how to dev at his house and he uses ilfosol3. Smile


Reply

philslizzy a écrit:
Great stories behind the great photos. Thanks!

I may look at C41 myself.


Thank you so much for looking. Very Happy
Yes I just got my c41 kit so may have a crack at doing some colour rolls tonight.


Reply

Here in the States, you can buy from Freestyle Photo a 1 liter Unicolor kit for doing C-41 for about $18 plus freight. It'll handle enough rolls such that you save money. I don't recall specifically how many rolls a 1 liter kit will do. Freestyle also carries Arista and Tetenal. In the UK, you'll probably be looking at Tetenal, which I hear is excellent, or maybe Unicolor also. I think Arista is Freestyle's house brand name, so you probably won't see it over there.

I have the 1 liter Unicolor kit. I haven't done anything with it yet. I have tried the small 1-pint Arista kit for E-6, though, and it was easy. The slides came out great, too. I've only done it once so far. I've just recently saved up enough rolls of E-6 to give it another go. I have a fresh 1-pint Arista kit that cost me about $23, but I'll be able to get at least five rolls out of it. I have two rolls of 120 and three rolls of 35mmx36. If I took those rolls down to my loical pro lab, it would cost me about $50, so I'm saving better than half using the Arista kit.

Actually, now that I think about it, I probably have several rolls of C-41 that I've finished. Guess it's time to try the Unicolor kit.

With color processing, the most important variable by far is maintaining a precise temperature. Probably the easiest way to do this is to get a cheap styrofoam cooler -- the kind you stick a six-pack or 12-pack of beer in -- and use this for your water bath. The water is well insulated by this cooler and the bath's temperature should not vary significantly during that portion of the developing process where water temp is critical.

What I have is a bit different. I have a styrofoam shipping container that meat companies use to ship their frozen steaks in (they add blocks of dry ice in with the steaks to keep them frozen during shipment). The walls are about 2 inches thick all the way around, but its about the same physical size as a styro cooler for a 12 pack.

So anyway, I just put the container in my sink and run the water until the temperature is just a bit warmer than I want it to be and then I fill it up. The chemical containers are already in the cooler. Then I let everything sit for a while, say 15 minutes or so. And then I compare the temperature of the chemicals to that of the water. Once it's the same, I know it's reached equilibrium and so if I need to heat it up, I'll add some hot water, or if it's too hot, I'll add a bit of cold, but keeping in mind that it's gonna be cooling off anyway.

It's just really a matter of being patient if you're doing it my way. But once you've hit the right temperature, there's no more messing about. It's time to get busy and knock it out. But it's easy. And rewarding, I think.


Reply

Yes, I am using the jobo c41 press kit. It's the same one my mate uses and he gets great results. I am think of using a similar method to you but was going to use my slow cooker as the water bath to maintain the temp.
My mate is meant to be bringing back an e6 kit that we are going halves in. So that will be the next challenge. Haha. All very satisfying when and if it works out. Haha. Fingers crossed I won't botch my c41. I guess only time will tell. Haha. I will update you guys with my progress. Thank you very much for the advice it is greatly appreciated. Very Happy


Reply

Good idea on using a slow cooker, if it will go all the way down to about 104F. We have one that never gets used. I'll have to pull it out from wherever it's buried and test it out.