| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Ven Oct 11, 2013 4:02 pm Sujet du message: M.P.P MkIII 4x5 |
|
 Posté: Ven Oct 11, 2013 4:02 pm Sujet du message: M.P.P MkIII 4x5 |
|
|
Farside wrote:
Oops, I seem to have bought one of these...
http://www.mppusers.com/
I got a MkIII (edit, had typed MkII) that's had new bellows (new sometime in the past decade or two, so plenty of life in them), and been factory upgraded with the International back - which also swaps into the Crown Graphic, but not vice versa, funnily enough.
I assume (but I could be wrong) that when the new back was fitted, the registration distance would have been set to be the proper standard figure, at least I hope so.
It's a hefty lump of a thing, a good couple of pounds heavier than the Linhof 9x12, but oozes an air of solidity and good quality workmanship. It needs the outer covering replaced, as it's falling off in places, but I'll get around to that eventually.
The rangefinder works, the patch is clear and distinct and moves properly, but without a lens on yet I don't know how accurate it will be. Adjusting the Kalart isn't too onerous a task.
There's a scale for a 135mm lens attached to the baseboard, which is handy for me, as I have a Wollensak Optar of that length (but no securing nut) which will fit in the lensboard with a bit of hole enlarging. I hope the focal marks suit the Optar, as I haven't a clue what would have been fitted there before.
It's got two accessory shoes on it, which leads me to think that this was a camera that was out earning its keep; there was some good reason for those two shoes. The middle one would have been an optical finder and the LH one a flash mount. The protector bracket around the rangefinder has a slide mount for a flash, but that was probably long since out-dated and out-moded, being a proprietory system.
The only thing missing is the front frame of the sports finder, but the bracket is still there, so that leads to the possibility of making one - it's a simple enough piece of wire.
Apart from the covering, everything is in very good condition and I'm looking forward to putting some film through this.
By getting this, I've scratched my Linhof itch for a while - I might eventually get a proper Technika III (I have a very good back waiting for one) but this is/was the British Linhof and that will do for now.
These are all seller's pics, just taken from the sale site.
1.
2.
3.
4.
5.
6.
Scabby underneath - needs re-covering.
 _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4
Dernière modification par Farside le Ven Oct 11, 2013 10:08 pm ; modifié 2 fois au total |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Ven Oct 11, 2013 5:01 pm Sujet du message: |
|
 Posté: Ven Oct 11, 2013 5:01 pm Sujet du message: |
|
|
Lloydy wrote:
That's a fine looking camera Dave, the covering is rough but the rest looks in good shape so it should be a nice restoration project. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Lun Oct 14, 2013 11:25 am Sujet du message: |
|
 Posté: Lun Oct 14, 2013 11:25 am Sujet du message: |
|
|
Farside wrote:
Cheers, Dave.
It's not needing re-covered on every panel, so I might just patch in the bottom panel and the outside front (underneath). That boss on the front for the tripod mount raises a problem for fitting around it.
I've just discovered the lens board fits the View II - that's a bonus.
Now I've just got to work out a system of adaptable boards which will allow me to mount lenses on the Linhof and swap easily to the MPP/View II. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
RSalles
 Inscrit le: 12 Août 2012 Messages: 1372 Localisation: Brazil - RS / South
|
 Posté: Lun Oct 14, 2013 2:32 pm Sujet du message: |
|
 Posté: Lun Oct 14, 2013 2:32 pm Sujet du message: |
|
|
RSalles wrote:
| Lloydy a écrit: |
| That's a fine looking camera Dave, the covering is rough but the rest looks in good shape so it should be a nice restoration project. |
X2!
Cheers,
Renato |
|
| Haut de page |
|
 |
Elmar Lang
 Inscrit le: 11 Avr 2012 Messages: 105
|
 Posté: Jeu Oct 17, 2013 8:01 am Sujet du message: |
|
 Posté: Jeu Oct 17, 2013 8:01 am Sujet du message: |
|
|
Elmar Lang wrote:
I enjoy using an MPP-Micro Technical Mk-VII since the mid-'90s and I'm still satisfied by its mechanical quality and accurate finish. It's a little lighter than a Linhof and that's good especially while carrying it in the backpack, while photo-hiking in the mountains.
MPPs are not as common as one could imagine so, finding one is always a nice surprise.
Recently, I've seen an MPP Microflex (MPP's answer to the Rolleiflex) and I've been impressed by its excellent quality.
Best wishes,
Enzo (E.L.) |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Jeu Oct 17, 2013 9:14 pm Sujet du message: |
|
 Posté: Jeu Oct 17, 2013 9:14 pm Sujet du message: |
|
|
Farside wrote:
Thanks, Renato, Enzo.
I'm figuring out what to do with the available lenses and incompatible boards of three view cameras.
I'm going to keep the Linhof Press as it is (I'd thought of taking the back and bellows from it onto the Technika II), as it's really rather a nice lightweight 9x12 view camera with the ability to be used as a point and shooter if I so desire. On that, I'll fit a Rodenstock 127mm Ysarex from a Polaroid 110A and it can stay there.
On the Technika II, the 150mm Xenar from the Press can live more -or-less permanently, as it should suit that well and it's contemporaneous with it.
Fortunately, both Linhofs have very simple flat plain boards of aluminium, so are easy to make.
Now, on the MPP - I have three lenses that will do nicely;
1. Dallmeyer 4.25" (108mm) with a view angle of ~90deg or so.
2. Optar 135mm
3. G-Claron 210mm (on its way, and finding a shutter for it)
I only need to make 2 boards (one came with the camera) and again, the boards are very simple and easy to DIY, just being flat and simple to cut/rebate/build-up. No fancy corners or recesses or swaged edges here.
Enzo, it's interesting you reckon the later MPP is lighter that its then contemporary model of Technika - that surprises me, as this model is pretty heavy, especially compared to the 9x12s it shares space with. I can only assume MPPs shed some weight and Technikas gained some. I know the Tech III is heavier than the Tech II, as the extra body size dictates some inevitable weight gain.
I don't think I'd want to go back-packing with this lump, but the Tech II or Press would definitely find a space with me on a journey into the hills. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Ven Oct 18, 2013 6:11 pm Sujet du message: |
|
 Posté: Ven Oct 18, 2013 6:11 pm Sujet du message: |
|
|
luisalegria wrote:
Very Nice !
Seems much like a 1950's Speed Graphic or Busch Pressman.
It looks like it has front rise shift and tilt ? _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
dof
 Inscrit le: 04 Fév 2009 Messages: 339 Localisation: Southern California
|
 Posté: Ven Oct 18, 2013 8:58 pm Sujet du message: |
|
 Posté: Ven Oct 18, 2013 8:58 pm Sujet du message: |
|
|
dof wrote:
These are so rare in the USA. |
|
| Haut de page |
|
 |
RSalles
 Inscrit le: 12 Août 2012 Messages: 1372 Localisation: Brazil - RS / South
|
 Posté: Ven Oct 18, 2013 9:19 pm Sujet du message: |
|
 Posté: Ven Oct 18, 2013 9:19 pm Sujet du message: |
|
|
RSalles wrote:
Farside,
Correct me if I'm wrong, but the Optar 4.7/135 is the default lens which came with the Speed Graphic, isn't it?
What's the corner performance of this lens in 4X5?
Cheers,
Renato |
|
| Haut de page |
|
 |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Sam Oct 19, 2013 1:11 am Sujet du message: |
|
 Posté: Sam Oct 19, 2013 1:11 am Sujet du message: |
|
|
luisalegria wrote:
The 135 was typical on the 4x5 speed, but there was no standard really.
Quite a lot of them were sold with 127mm for Press use as they liked the wide angle and bettet DOF
After all they tended to keep them at f/16 for flash use and guesstimated focus. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Sam Oct 19, 2013 1:58 pm Sujet du message: |
|
 Posté: Sam Oct 19, 2013 1:58 pm Sujet du message: |
|
|
Farside wrote:
| luisalegria a écrit: |
Very Nice !
Seems much like a 1950's Speed Graphic or Busch Pressman.
It looks like it has front rise shift and tilt ? |
Luis, it has rise, shift and approx 20deg of back tilt. No front tilt, but I might look at a later standard from a MkVIII if I think I'll really need that, and swing.
http://www.mppusers.com/frontitltmkvii.htm that's assuming the rails are the same.
Renato, I don't know what the corner performance is like yet, I've only shot 6x9 so far with an Optar. It will probably be fine, by all accounts. Then there's variation, of course; the one on the Crown seems fine, and the loose one hasn't been mounted to anything, yet. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
Elmar Lang
 Inscrit le: 11 Avr 2012 Messages: 105
|
 Posté: Sam Oct 19, 2013 3:37 pm Sujet du message: |
|
 Posté: Sam Oct 19, 2013 3:37 pm Sujet du message: |
|
|
Elmar Lang wrote:
I liked a lot to carrry my MPP outfit (camera, 3 lenses, 6 double film holders and the 6x9 back, accessories, filters and a heavy, old Manfrotto tripod) on mountain trips.
Here's a picture taken many years ago, with its Xenar lens on a 4"x5" film:
 |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|