MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Cheap split image screen for Pentax K30 - experience
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Just to note an experience with this sort of thing.
I have a new K30 to replace my old worn-out K-x
To go with it I ordered a cheap split image focus screen.

Its the cheapest possible such screen from China -
http://www.ebay.com/itm/271213981670?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Vendor is digital_winway

Note that Pentax DSLR's have two different styles of focus screens, and they are not physically identical. Its important to order one made for the right camera series, i.e, for the K7,K5,K30, etc. vs K100, Kx, Kr, etc.. The tab location is different between series. The more expensive line of Pentax DSLR's are designed to have easily replaceable screens, the cheaper ones are a bit more difficult.

This cheap one came with various tools like microfiber cloth, two sets of tweezers, rubber finger tips, etc. Useful I guess but anyone with minimal tools should be able to do the work without them, at least on cameras like the K30. There is just a single latch that drops the focus screen tray down. Swap the screens, pop the tray back up, and with luck thats all you need.

However, the real troubles start with focus accuracy. What I found was that the screen I got was showing considerable front focus. I believe that the original Pentax screen was also showing such front focus, but I hadn't realized it until the split image/microprism results made it plain. This explains some odd results I've been noticing with the K30, where the focus confirm was actually much more accurate than screen focusing. I even changed the AF setting to use just a single central point, and focus confirm is very accurate indeed.

Its not the screen vendors fault, I think this was a factory problem on the camera. It cant be easy to calibrate manual focus on these cameras that weren't intended for easy manual focus. I have, all these years, been doing what we used to call "Aerial image" focusing, as there is no real groundglass, and that is not an easy thing, and it can't be easy to do consistently in the factory.

So how to fix it ? Pentax has two spacer shims above the groundglass tray. To adjust front focus its necessary to remove one or the other of these, and there is a separate latch for it. This is a much less accessible and much smaller latch, and the shims are quite a bit more difficult to remove and replace. And they are more fragile than the focus screen as they are easily bent. I removed one shim, and the results are interesting.

With 50/1.4 lenses I still have a bit of front focus (very slight, but at f/1.4 very slight is all you need to be very noticeably off). On longer lenses, like 200/3.5 or so, it seems to be spot on. I am quite puzzled as to why this should be. It makes me wonder about the unexamined assumption I've had all these years about proper registration of SLR focus screens.

Anyway, many other DSLR models have replaceable screens, and most if not all of these also have shims to adjust them. I think Canon even has a large inventory of finely graded shims for this purpose. At this point I would not immediately trust the registration of any stock DSLR focus screen.


Reply

luisalegria a écrit:
It makes me wonder about the unexamined assumption I've had all these years about proper registration of SLR focus screens.

Anyway, many other DSLR models have replaceable screens, and most if not all of these also have shims to adjust them. I think Canon even has a large inventory of finely graded shims for this purpose. At this point I would not immediately trust the registration of any stock DSLR focus screen.


Hah. You're talking to a Canon 10D owner here, you know.
Tell me about it.


Reply

I used a screen cannibalised from a derelict ME super. The split prism works well but i am not quite so happy that its not adversely affecting exposure consistency, and the general focus perpective isn't, I don't think, better than the standard screen leaving me overreliant on locating an edge for the SP.

Prompted by this thread:

http://www.pentaxforums.com/forums/115-pentax-k-5/142241-best-screen-ever-manual-focus-canon-ee-s.html

I am going to check out the Canon screen. This thread has a lot of informative contributions.