MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Samoca 38.5mm F1.0 D mount lens converted to MFT
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I came across a rather interesting lens a couple of weeks ago, a Samoca 1.1/2inch F1.0 D mount lens. I've done a couple of conversions to D mount lenses before to C mount, normally 1/12" almost covers a MFT sensor with some crazy swirl in the corners.

On this one the helicoid barrel was too big to try and squeeze it into a C mount base so I used a MFT C Mount adapter. The helicoid was frozen solid so into the oven it went upto 160C' before it would budge (I did worry about the lenses shattering if the body didn't expand enough, but everything turned out fine)

To my surprise the rear element was huge in comparison to other D mount lenses, my friend with a lathe removed the excess from the base of the lens and the adapter.

The conversion came out OK and the images won't any awards in sharpness, but it is quite a fun lens to play with, The field curvature is crazy and with a bit of work done on the rear retainer ring the image circle almost covers the A6000 sensor which is a bit crazy for a D mount. I think they might have wanted to make it a C mount lens but with the curvature I reckon they scrapped the idea.

#2


#3


#4


#5


I'll load some images of the pictures once I have had a chance to play around with it a bit more


Dernière modification par Layer-cake le Jeu Juin 23, 2016 2:15 pm ; modifié 1 fois au total


Reply

Well done! Look forward to your photos.


Reply

Like 1 Thanks Calvin,

I need to get used to the curvature and somehow use that, but so far the images of our new cat have turned out ok..


Reply

so do I! Like 1 small Like 1 small Like 1 small


Reply

Congrats, this is a lens usually seen in C-mount Wink
Klaus has it too, but I do not think he "coupled" Laughing

It can be found as Carl Meyer Videostigmat 38mm f/1 and Soligor Elitar 38mm f/1

What did you pay for it?


Reply

Ooo you are right, searching under the samoca brand didn't bring anything up for it and all I could find was the rexar D mount lens with the same spec but not the same body

Here is a thread Klaus did a couple of years back, the lens itself has the very same heavy field curvature

http://forum.mflenses.com/carl-meyer-videostigmat-f1-0-1-5-38mm-t32564.html

I got very lucky by the looks of things


Dernière modification par Layer-cake le Mar Sep 06, 2016 9:14 am ; modifié 1 fois au total


Reply

Layer-cake a écrit:
Ooo you are right, searching under the samoca brand didn't bring anything up for it and all I could find was the rexar D mount lens with the same spec but not the same body

Here is a thread Klaus did a couple of years back, the lens itself has the very same heavy field curvature

http://forum.mflenses.com/carl-meyer-videostigmat-f1-0-1-5-38mm-t32564.html

I got very lucky by the looks of things, bought this for about $20


This lens sells for $500 in C-mount Wink
Do the serial have a "K" prefix on your lens?


Reply

I saw that, it almost makes me a bit sad as I am quite strict on myself for what I can keep price wise......I justified keeping a exacta mount Trioplan recently as the mount type here in SA is not desirable and it had some heavy scratches on the front but such is life.


Reply

Wink , any serial info?