MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Fixing automatic diaphragm lever of Oreston 1.8/50mm ?!
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I decided to clean the diaphragm of Oreston 1.8/50mm (similar to old Pentacon auto 1.8/50mm)
After successfully cleaning i have assembled the rear part.
By turning the diaphragm ring and pressing the lever for the automatic diaphragm it closes to the desired position, but does not return automatically. The diaphragm remains closed and can be opened only by reverse rotation of the diaphragm ring.
I do not understand the reason for this!
Does someone have a suggestion or advice?
Thank you!





Reply

The reason of the problem with the lever was that I tightened strongly that screw (see Picture)
After tightening, it have to be screwed back 1 / 4 turn.
Furthermore one spring was released at its upper end.