| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
alaios
 Inscrit le: 24 Jan 2014 Messages: 724
|
 Posté: Ven Mai 30, 2014 6:04 pm Sujet du message: Two basic film questions for my camera |
|
 Posté: Ven Mai 30, 2014 6:04 pm Sujet du message: Two basic film questions for my camera |
|
|
alaios wrote:
Hi two very basic thinks.
1. I have a iso 3200 black and white film. My camera support in the metering only 1600. I can set though the exposure compensation dial but I always get confused.. Iso 3200 is iso 1600 +1 or -1 in my exposure compensation dial?
2. If I want to push my hp5 iso 400 film to iso 800 ... I just shoot it as iso 800 and then do the rest during development. Would not that be right?
Regards
Alex |
|
| Haut de page |
|
 |
miran
 Inscrit le: 01 Août 2012 Messages: 1364 Localisation: Slovenia
|
 Posté: Ven Mai 30, 2014 6:17 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 6:17 pm Sujet du message: |
|
|
miran wrote:
1. You would use -1 EV compensation. But it really doesn't matter much.
2. That's correct. Essentially you underexpose and overdevelop.Alternatively you could look into a technique called stand development. In that case it doesn't matter which film you use, what ISO, how much under or overexposure, etc., you just put the film into a very thin solution of developer and leave for an hour or so and it comes out right. |
|
| Haut de page |
|
 |
David
 Inscrit le: 13 Avr 2011 Messages: 1869 Localisation: Denver, Colorado
Expire: 2013-01-25
|
 Posté: Ven Mai 30, 2014 6:40 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 6:40 pm Sujet du message: |
|
|
David wrote:
You can shoot it at 1600 pull process one stop. The DigitalTruth Massive Development Chart will have directions for that.
Delta 3200 at 400 ISO is a fantastic combination. I haven't tried it at 1600. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Haut de page |
|
 |
David
 Inscrit le: 13 Avr 2011 Messages: 1869 Localisation: Denver, Colorado
Expire: 2013-01-25
|
 Posté: Ven Mai 30, 2014 6:41 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 6:41 pm Sujet du message: |
|
|
David wrote:
But to answer your question a different way, if your meter reading at 1600 says f5.6 and 1/125th, then to shoot at 3200 simply set your shutter speed to 1/250th. 3200 is one stop faster than 1600 so you need to cut the amount of light in half. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Haut de page |
|
 |
alaios
 Inscrit le: 24 Jan 2014 Messages: 724
|
 Posté: Ven Mai 30, 2014 6:43 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 6:43 pm Sujet du message: |
|
|
alaios wrote:
| miran a écrit: |
1. You would use -1 EV compensation. But it really doesn't matter much.
2. That's correct. Essentially you underexpose and overdevelop.Alternatively you could look into a technique called stand development. In that case it doesn't matter which film you use, what ISO, how much under or overexposure, etc., you just put the film into a very thin solution of developer and leave for an hour or so and it comes out right. |
1. Why it does not matter?
2. Sounds intresting and very nice for a lazy guy like me. I guess it should also have lot of negatives...
Alex |
|
| Haut de page |
|
 |
miran
 Inscrit le: 01 Août 2012 Messages: 1364 Localisation: Slovenia
|
 Posté: Ven Mai 30, 2014 6:57 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 6:57 pm Sujet du message: |
|
|
miran wrote:
1. Film has such huge latitude you can easily compensate for that 1 stop with development or when scanning (I assume you scan).
2. No negatives. The only thing is that contrast will be potentially much lower, the negative will look quite flat. This would be important if you were printing traditionally with an enlarger, but because you're scanning digitally this is actually a good thing. You can put more contrast in during scanning or post production, it's much more difficult to take it away. |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Ven Mai 30, 2014 9:21 pm Sujet du message: |
|
 Posté: Ven Mai 30, 2014 9:21 pm Sujet du message: |
|
|
philslizzy wrote:
someone mentioned stand developing to Alex...  _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|