MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Original lens hood variations
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Original lens hoods never seem to be exactly the same as another Wink

these 3 variants of 46mm lens hoods for early preset and Auto Takumars might show an evolution
1st is slip on, second one hasn't changed much in looks but is screw on, third is screw on and one colored



or see these two Canon hoods for 40.5 filter thread LTM lenses





none of these 5 original Olympus lens hoods for 43mm Pen-F lenses are identical.
2 of the T-45 only differ by somewhat different lettering of 'Olympus Japan' while the 3rd says 'Olympus' on one and 'Japan' on the other side.
Of the S-45s one has printed which lenses it can be used, the other says 'T45', the first has 'Olympus Japan' written on the 'slip on metal part', the other on the black hood itself.



btw. the slip on 'S45' can be used on all the Pen-F lenses that have 43mm filter thread, the 3.5/20, 4/25, 2.8/25, 1.8/38, 2.8/38, 1.4/40 and 3.5/100,
the screw on 'T45' vignettes on the 20mm and 25mm lenses.

and please add your findings!


Reply

I like to have the original hoods for my lenses, I don't have them all though. I rarely use them, for everyday use I just use the cheap collapsible rubber ones, which I don't worry about losing.


Reply

Lloydy a écrit:
I like to have the original hoods for my lenses, I don't have them all though. I rarely use them, for everyday use I just use the cheap collapsible rubber ones, which I don't worry about losing.

+1!
Especially those Zeiss ZF massive met bayonet mount shades are a pure enjoument, o use!
For my 1.4/35 and 1.4/85 Rollei QBM lenses there seem never original shades made, so I use DIY shortened shades or in case of longer walks rubber ones.
And my 18mm QBM Distagon? There is no thread to use shade at all... Shocked


Reply

Takumars first, then Olympus Pen-Fs and lately Canon LTMs are the lenses I 'collected' and have been using and their hoods had come along. They are beautiful pieces of equipment, at least collectors will think so and be interested in their variations. If you agree please show yours!

Talking about actual use I must confess that I never have used any of the hoods shown. For occupying less space I also prefer cheap rubber collapsible hoods, nevertheless they use space inside the small waist bag I usually, when out shooting, carry my gear in. Therefore I hardly ever use those neither but my left hand as shade instead