MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

RMC Tokina 24mm 2,8 aperture problem
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi! Bought a RMC Tokina 24mm 2,8 from the local market. I had plans to use it in front of my Canon 7D. Tokina have a Minolta MD mount. Maybe I am doing something wrong but I suspect that something is broken. If I move the aperture ring nothing don't move. If I press/move the lever on the mounting side of the lens, still nothing. I am pretty sure that the lever on the mounting side should close the aperture!?? Am I wrong? Any tricks? I am pretty noob with manual lenses, especially with Minolta lenses.


Reply

1. By the sound of it the lens has oily aperture and will require service.
2. MD mount is not a good option for Canon EF to begin with.


Reply

Gardener a écrit:
1. By the sound of it the lens has oily aperture and will require service.
2. MD mount is not a good option for Canon EF to begin with.


Why MD mount isn't good option for EF mount? Rolling Eyes


Reply

Because MD register distance is shorter than EF, meaning that you can't use a simple glassless adapter and achieve focus past few feet if that.


Reply

There is an excellent Wiki page about flange distances for all types of lens mounts and their adapters.
Shouldn't this be in a sticky or is it already there ?

here
https://en.wikipedia.org/wiki/Flange_focal_distance