MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

3D printing the grip for a Minolta MC 35 mm f/1.8
Voir le sujet précédent :: Voir le sujet suivant  


Reply

My Minolta MC 35 f/1.8 was missing its focusing ring grip when I got it. It's generally a bit beaten up, so this kinda fit the look, but it bothered me nonetheless. I found many ideas how to replace the grip around here and on other forums, but in the end, I decided that it had to look like the original. So I build a CAD model and had a grip 3D printed. This is the result:






I thought I'd share this here if anybody was interested in the process. More details and the STL file for printing can be found in the corresponding blog post. I also included the Solid Works (CAD software) file there, so you can modify this for other Minolta lenses if you wish. You are free to do so, as long as you credit me and do not use it commercially.


Reply

Like 1 Like 1 Like 1


Reply

Like 1 small Like 1 Thank you! Like 1 Like 1 small