MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Smudge/haze after fungus cleaning
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Yesterday i decided to clean the fungus from a cheap Olympus f.zuiko 50/1.8. As usual i used hydrogen peroxide. I did it to tens of lenses before. There are specimens that cannot be removed with hydrogen peroxide only then i mix it 50/50 with ammonia. In this case i didnt because the fungi disappeared.
Then i cleaned the glass with lens tissues and ROR but when i put it on the light i found that the glass has smudge/haze which cannot be cleaned in any way. I am not sure if its because of the hydrogen peroxide, ROR or the fungi. Here is a picture:
#1


Any advice? I can polish the glass but i want to know if anybody has experienced it before and what causes it.


Reply

Polishing it yourself is out of question. In general having it polished and re-coated sometimes costs more than buying another one. What lens is it?


Reply

zanxion72 a écrit:
Polishing it yourself is out of question. In general having it polished and re-coated sometimes costs more than buying another one. What lens is it?

Its a cheap Olympus f.zuiko 50/1.8 auto-s. I dont care much about it but wanna know what and how to avoid.


Reply

I tried cleaning fungus out of a Zuiko 50 1.8 and made it worse, exactly the same problem with haze that couldn't be cleaned. I use cold cream to clean fungus, which isn't aggressive at all.
I stripped the lens and mounted an old folding camera lens in the helicoid, so I should have the glass somewhere Rolling Eyes If I find it I'll try cleaning it again.


Reply

Hmm. This happens to me for first time. I cleaned/repaired many lenses. So it seems that these zuikos have some different coating. I can try to polish it with Cerium Oxide and Dremel removing the coating completely.


Reply

Well I have a Tokina zoom with the same problem i.e. it has a haze and it's behind the front element and nothing works removing it. Doesn't seem to affect the sharpness but probably reduces contrast .....as in theory a haze must have some effect.


Reply

Soft coating(s) of internal surfaces of lens optics is not unknown! (Nor is etching due to fungal metabolic actions.)

Search for a thread listing these lenses?


Reply

I would just throw it away. If it is not a group of elements but a simple one, dip it in water with detergent overnight and see if it gets cleaned. If not don't spend more of your time with it, it won't go away.


Reply

visualopsins a écrit:
Soft coating(s) of internal surfaces of lens optics is not unknown! (Nor is etching due to fungal metabolic actions.)

Search for a thread listing these lenses?

Its the front element's outer surface. So the surface which should be the most durable. The fungus were only inside the group. Im very suspicious about the ROR lense cleaner. It always leave a tiny film when im cleaning the lens. Even that i use a short spray on the cloth.