MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Spotmatic ES mirror issue, Part 57
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Houseofgee a écrit:
Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Thank you, Edgar. I’m not sure happened to the pic on my first post.


Reply

Houseofgee a écrit:
Thank you, Edgar. I’m not sure happened to the pic on my first post.



You can't post images or links in your first post, an anti-spam measure. You'll be ok from now on.

Welcome to the forum by the way! Someone should be along who may be able to help.


Reply

Thanks!


Reply

Welcome Houseofgee

(No photos or links in first post is anti-spam protection)