MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

help aperture blades
Voir le sujet précédent :: Voir le sujet suivant  


Reply

someone can help me with that problem?:how can i put back aperture blades (7 ) on Sonnar 180/2.8 medium format ? thanks a lot


Reply

Welcome paulalin31

You have blades?


Reply

yes i have blades. 7 blades


Reply

Please post photo of one blade. Somebody can then show us how blades are positioned to produce an iris. Then should be simple to rebuild iris inside lens.


Reply


[/img]


Reply

Something tells me that you're in way, way over your head.
But, given the fact that it's a big lens it's much easier than if it was a CZJ 135/3.5.
Zebra version to be more specific.
Now, you need a wooden dowel inside the barrel with the same diameter as the barrel itself and then you can start laying down the blades.
The tricky part is that every blade but the first one, obviously, should be positioned UNDER ( not above ) the one before it. The second one goes under the first one , the 3rd under the 2nd, so on and so forth.
If you don't do that it will not open correctly.
As usual it might be other methods to skin the proverbial cat but this is the way I did it.


Reply

I recommend you do a search on YouTube for aperture blade reassembly. I'll bet you get hits. These videos should help.

Here are a couple examples of what I found. I did a search on 'lens aperture blades'.

https://www.youtube.com/watch?v=-8Ha1blxeEA

https://www.youtube.com/watch?v=M4T0RQSfnyk


Reply

thanks all for help