| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Doc Sharptail
 Inscrit le: 23 Nov 2020 Messages: 1504 Localisation: Winnipeg Canada
|
 Posté: Jeu Fév 17, 2022 5:17 am Sujet du message: Cleaning focus grip rubber. |
|
 Posté: Jeu Fév 17, 2022 5:17 am Sujet du message: Cleaning focus grip rubber. |
|
|
Doc Sharptail wrote:
Recently got a nice lens at a very hard to beat price.
Got a little stumped on cleaning the excessive dirt off the the focus grip rubber.
Before pic.
After pic.
I tried first with luke-warm soap water and various cleaning cloths.
The more I tried, the grayer the rubber appeared, even after successive rinses.
I tried with Armour-All automobile interior vinyl cleaning wipes, and it made a big difference.
I'll do it once more, with a soft tooth brush, before the final wipe...
-D.S. _________________
D-810, F2, FTN, FT-3 in Black
35mm f2 O.C. nikkor
50 f2 H nikkor, 50 f2 H.C. nikkor, 50 f 1.4 AI-s, 135 f3.5 Q,
50 f2 K nikkor 2x, 28-85mm f3.5-4.5 A/I-s, 35-105 3.5-4.5 A/I-s, 200mm f4 Micro A/I, partial list.
"Ain't no half-way" -S.R.V.
"Oh Yeah... Alright" -Paul Simon |
|
| Haut de page |
|
 |
RokkorDoctor
 Inscrit le: 27 Nov 2021 Messages: 1562 Localisation: Kent, UK
Expire: 2025-05-01
|
 Posté: Jeu Fév 17, 2022 10:35 am Sujet du message: |
|
 Posté: Jeu Fév 17, 2022 10:35 am Sujet du message: |
|
|
RokkorDoctor wrote:
Good to know about the cleaning wipes.
On old vinyl grips, I find an alternate use of water + liquid hand soap, and IPA (Isopropyl alcohol, not Indian Pale Ale) works well. Old grime often has both water soluble as well as organic solvent soluble constituents. So come to think of it, a good scrub in Indian Pale Ale followed by a good rinse might actually also work
It is even easier to do if the grip is of the stretchy band type that can easily be removed from the lens. _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Haut de page |
|
 |
martinsmith99
 Inscrit le: 31 Août 2008 Messages: 7029 Localisation: S Glos, UK
Expire: 2013-11-18
|
 Posté: Jeu Fév 17, 2022 10:54 am Sujet du message: |
|
 Posté: Jeu Fév 17, 2022 10:54 am Sujet du message: |
|
|
martinsmith99 wrote:
Any of those car vinyl cleaners are pretty good. I've also used shoe polish, but you do have to work to get rid of excess. _________________ Casual attendance these days |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
|
| Haut de page |
|
 |
Mir
 Inscrit le: 07 Fév 2011 Messages: 990 Localisation: Montreal, Canada
Expire: 2017-09-30
|
 Posté: Lun Fév 21, 2022 5:25 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2022 5:25 pm Sujet du message: |
|
|
Mir wrote:
I often use Isopropyl alcohol with a tooth brush and then I wipe it with a humid cloth ....
works fine...
But i recently found that https://www.kleenflo.com/products/809.html is wonderful !
I don't like oily or smelly stuff and this one is unscented ....
I've renovated a few Leica, Canon, Rollei and Zeiss Ikon front caps (some are bakelite)
and all my AF Minolta's rubber grips with great success.... _________________ "Obsta principiis, finem respice"
"There is a fine line between hobby and mental illness"
MISC: Tamron SP 35-80 (01A), Auto Chinon Tomioka 1.4/55, Primoplan 2/58, Tokina AT-X 2.5/90, Tamron SP 5,6/300 (54B)
ZEISS: WG Distagon 2.8/25, WG Distagon 2.8/35 HFT, WG Planar HFT 1.4/50, Ultron 1.8/50, Biotar 2/5,8cm, WG Sonnar 2.8/85, WG Sonnar HFT 2.8/135
VOIGTLÄNDER : Ultron Aspherical 1.8/21, Ultron 2/28, Nokton Aspherical 1.2/35, Nokton Classic 1.4/40, Nokton 1.2/50, Nokton Aspherical 1.5/50, Color-Heliar 2.5/75
MINOLTA: MD 3.5/35-70 Macro, MD 1.2/50, MC Rokkor-X 1.2/58, MD Macro 3.5/50
LEITZ: ELMARIT-R 2.8/28, SUMMICRON-R 2/35 (II), SUMMICRON-R 2/50 (II), TELE ELMARIT-M 2,8/90 (Thin), ELMARIT-R 2.8/135
CANON RF: 3.5/25, 2.8/28, 2/35, 1.2/50, 1.4/50, 1.5/50, Serenar 1.8/50, Serenar 1.9/50, 2/85, 2/100, 3.5/100
LTM : Konishiroku Hexanon 1.9/50, YASHICA YASHINON 1.8/5cm, FUJINON L 2/5cm, CHIYODA KOGAKU SUPER ROKKOR 1.8/5cm, CHIYOKO SUPER ROKKOR C 2/5cm, TOKYO KOGAKU Topcor-S 2/5cm, Nippon Kogaku NIKKOR-H.C 2/5cm, KMZ Jupiter-8 2/5cm
DKL : VOIGTLÄNDER SKOPAREX 3,4/35, SEPTON 2/50, DYNAREX 3,4/90, SUPER-DYNAREX 4/135, Scheiner-Kreuznach Retina-Xenon 1,9/50
And a small Minolta AF set: 2.8/20, 2/28, 1.4/35, 1.4/50, 2/100, 4.5/100-200, 4/28-135
@we3fotography
@7plus_pictures
@_whats.that.car_ |
|
| Haut de page |
|
 |
visualopsins
 Inscrit le: 05 Mar 2009 Messages: 11700 Localisation: California
Expire: 2027-07-11
|
 Posté: Lun Fév 21, 2022 6:47 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2022 6:47 pm Sujet du message: |
|
|
visualopsins wrote:
There's a product "303" which I've used to restore clarity to some vinyl windows in sails, tents, etc.. Works; no scent. https://www.autogeek.net/303.html _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Haut de page |
|
 |
BitGid
Inscrit le: 27 Fév 2018 Messages: 13
|
 Posté: Dim Avr 17, 2022 12:51 pm Sujet du message: |
|
 Posté: Dim Avr 17, 2022 12:51 pm Sujet du message: |
|
|
BitGid wrote:
Discoloration on rubbers like this is often a chemical change as a result of changing humidities. It took manufacturers a fair while and a dark period of rubber to work out what was best - the stick backs of the Nikon F80/F100 are notorious examples.
I've tried most remedies out there but the only one that has truly worked for me is mineral oil. I use this. You really don't need a lot, just apply a tiny bit to a cotton bud (q-tip) and gently massage in.
Dernière modification par BitGid le Mer Avr 20, 2022 4:25 am ; modifié 2 fois au total |
|
| Haut de page |
|
 |
stevemark
 Inscrit le: 29 Avr 2011 Messages: 5509 Localisation: Switzerland
|
 Posté: Dim Avr 17, 2022 11:58 pm Sujet du message: Re: Cleaning focus grip rubber. |
|
 Posté: Dim Avr 17, 2022 11:58 pm Sujet du message: Re: Cleaning focus grip rubber. |
|
|
stevemark wrote:
| Doc Sharptail a écrit: |
Recently got a nice lens at a very hard to beat price.
Got a little stumped on cleaning the excessive dirt off the the focus grip rubber.
...
Before pic.
...
After pic.
I tried first with luke-warm soap water and various cleaning cloths.
The more I tried, the grayer the rubber appeared, even after successive rinses.
|
Yep, that's how it is.
I fact, the grey "color" is the result of plasticizers volatilizing from the rubber grip.
In other words: You can't scrub off the "dirt", but you have to replenish the rubber with plasticizers. Plasticisers are "low-molecular-weight polymers that increase the spacing between chains of crystalline polymer." (https://www.sciencedirect.com/science/article/pii/B9781855739468500133). They often are found in tire protectants and similar products, and you can use them to "cure" your damaged rubber parts.
Be aware that many of these oily compunds are interfering with the endocrine system; some are inhibiting and/or disrupting the male hormone system.
S _________________ www.artaphot.ch |
|
| Haut de page |
|
 |
Doc Sharptail
 Inscrit le: 23 Nov 2020 Messages: 1504 Localisation: Winnipeg Canada
|
 Posté: Lun Avr 18, 2022 2:21 am Sujet du message: |
|
 Posté: Lun Avr 18, 2022 2:21 am Sujet du message: |
|
|
Doc Sharptail wrote:
The lens was covered in grey powder dust when I bought it.
It looked as if someone had covered a concrete cutting operation with it on a prosumer nikon film camera for a construction magazine.
I suspect that had a lot to do with the OTD price of $2.00
...one of the best buys I've ever made in my life.
-D.S. _________________
D-810, F2, FTN, FT-3 in Black
35mm f2 O.C. nikkor
50 f2 H nikkor, 50 f2 H.C. nikkor, 50 f 1.4 AI-s, 135 f3.5 Q,
50 f2 K nikkor 2x, 28-85mm f3.5-4.5 A/I-s, 35-105 3.5-4.5 A/I-s, 200mm f4 Micro A/I, partial list.
"Ain't no half-way" -S.R.V.
"Oh Yeah... Alright" -Paul Simon |
|
| Haut de page |
|
 |
Doc Sharptail
 Inscrit le: 23 Nov 2020 Messages: 1504 Localisation: Winnipeg Canada
|
 Posté: Lun Avr 18, 2022 2:30 am Sujet du message: Re: Cleaning focus grip rubber. |
|
 Posté: Lun Avr 18, 2022 2:30 am Sujet du message: Re: Cleaning focus grip rubber. |
|
|
Doc Sharptail wrote:
| stevemark a écrit: |
Be aware that many of these oily compounds are interfering with the endocrine system; some are inhibiting and/or disrupting the male hormone system.
S |
Gee, great! At least I'm well past the age where hormones are going to make a difference, one way or the other
I more or less minimize my contact with those wipes, unless I'm cleaning the car.
-D.S. _________________
D-810, F2, FTN, FT-3 in Black
35mm f2 O.C. nikkor
50 f2 H nikkor, 50 f2 H.C. nikkor, 50 f 1.4 AI-s, 135 f3.5 Q,
50 f2 K nikkor 2x, 28-85mm f3.5-4.5 A/I-s, 35-105 3.5-4.5 A/I-s, 200mm f4 Micro A/I, partial list.
"Ain't no half-way" -S.R.V.
"Oh Yeah... Alright" -Paul Simon |
|
| Haut de page |
|
 |
cooltouch
 Inscrit le: 15 Jan 2009 Messages: 9096 Localisation: Houston, Texas
|
 Posté: Lun Avr 18, 2022 8:53 am Sujet du message: |
|
 Posté: Lun Avr 18, 2022 8:53 am Sujet du message: |
|
|
cooltouch wrote:
I'm not much of a fan of Armor-All because the vinyl and plastic tend to get addicted to it. At least the automotive variety. Something that I was told years ago that works well as a rubber preservative is brake fluid. The guy who told me about it said, think for a minute -- brake fluid is designed to protect rubber so that its sealant properties are maintained at its optimum in brake systems. Now, I haven't tried brake fluid yet for this sort of application. But I'm just tossing it out there as a possible treatment. I would recommend, however, that if it is used, to wipe down the treated area thoroughly after application because brake fluid can have adverse effects on things link paint, for example. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Haut de page |
|
 |
RokkorDoctor
 Inscrit le: 27 Nov 2021 Messages: 1562 Localisation: Kent, UK
Expire: 2025-05-01
|
 Posté: Lun Avr 18, 2022 9:58 am Sujet du message: |
|
 Posté: Lun Avr 18, 2022 9:58 am Sujet du message: |
|
|
RokkorDoctor wrote:
| cooltouch a écrit: |
| I'm not much of a fan of Armor-All because the vinyl and plastic tend to get addicted to it. At least the automotive variety. Something that I was told years ago that works well as a rubber preservative is brake fluid. The guy who told me about it said, think for a minute -- brake fluid is designed to protect rubber so that its sealant properties are maintained at its optimum in brake systems. Now, I haven't tried brake fluid yet for this sort of application. But I'm just tossing it out there as a possible treatment. I would recommend, however, that if it is used, to wipe down the treated area thoroughly after application because brake fluid can have adverse effects on things link paint, for example. |
Focus grips aren't usually rubber; most often it is vinyl, with a varying degree of plasticisers to make it either a "soft" or "hard" vinyl. Brake fluid probably isn't going to do any damage though, but I have noticed that some oily stains, when left in contact for long periods, can make both rubber as well as vinyl expand al little. So whilst it may be OK for rubber, it might not be for vinyl.
Whilst colloquially sometimes used for vinyl, "rubber" should really be reserved for natural rubber, i.e. a latex based product. It doesn't always matter, but it is crucial to know the difference e.g. when specifying electrical cable insulation...
EDIT: the above applies to legacy lenses by the way, modern lenses seem to use different materials which may be rubber, or some other kind of elastomer. The worst are the "soft-touch" elastomer coatings that go sticky after a couple of years; that stuff should be banned on environmental / planned obsolescence / sustainability grounds... _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Haut de page |
|
 |
Olivier
 Inscrit le: 18 Fév 2009 Messages: 5097 Localisation: France
Expire: 2015-08-06
|
 Posté: Ven Avr 22, 2022 7:38 am Sujet du message: |
|
 Posté: Ven Avr 22, 2022 7:38 am Sujet du message: |
|
|
Olivier wrote:
Hi.
I use Nivea cream and it works great.
For sticky rubber, first I use talc and then same cream. _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Haut de page |
|
 |
DigiChromeEd
 Inscrit le: 29 Déc 2009 Messages: 3468 Localisation: Northern Ireland
|
 Posté: Ven Avr 22, 2022 4:30 pm Sujet du message: |
|
 Posté: Ven Avr 22, 2022 4:30 pm Sujet du message: |
|
|
DigiChromeEd wrote:
| Olivier a écrit: |
Hi.
I use Nivea cream and it works great.
For sticky rubber, first I use talc and then same cream. |
Hi Olivier
After applying the talc do you clean it off with something or just apply the Nivea cream on top of the talc?
Does it remove the stickyness for any length of time? _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| Haut de page |
|
 |
Olivier
 Inscrit le: 18 Fév 2009 Messages: 5097 Localisation: France
Expire: 2015-08-06
|
 Posté: Ven Avr 22, 2022 8:55 pm Sujet du message: |
|
 Posté: Ven Avr 22, 2022 8:55 pm Sujet du message: |
|
|
Olivier wrote:
| DigiChromeEd a écrit: |
| Olivier a écrit: |
Hi.
I use Nivea cream and it works great.
For sticky rubber, first I use talc and then same cream. |
Hi Olivier
After applying the talc do you clean it off with something or just apply the Nivea cream on top of the talc?
Does it remove the stickyness for any length of time? |
Hi Ed.
I wipe talc off and then apply Nivea cream. On one of my lens grip stickyness reappeared several month later but less. I just applied Nivea cream again. _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Haut de page |
|
 |
m__
Inscrit le: 29 Avr 2020 Messages: 18
|
 Posté: Mer Mai 18, 2022 5:34 am Sujet du message: |
|
 Posté: Mer Mai 18, 2022 5:34 am Sujet du message: |
|
|
m__ wrote:
Try washing it with soap, drying and then wiping with silicone grease (wipe, leave it for a while, then wipe again). Was experimenting with repairing stretched grip the other day, so I soaked it in silicone grease for a couple of hours. Not only it shrunk but also got this brand-new look. Not using it, because I made a leather grip that I like more but almost year later it looks like this (untouched Zuiko grip in excellent condition for comparison):
Before:
 |
|
| Haut de page |
|
 |
|
|