| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Mike Deep
 Inscrit le: 25 Oct 2008 Messages: 447 Localisation: Upstate New York
|
 Posté: Mer Nov 19, 2025 2:15 pm Sujet du message: Tiny White Spots on Lens |
|
 Posté: Mer Nov 19, 2025 2:15 pm Sujet du message: Tiny White Spots on Lens |
|
|
Mike Deep wrote:
I have an Auto Sears 55/1.4, the Tomioka-made one, that I've been cleaning up. It's all been going fairly well, but there are tiny white dots on the surface of the rear element that need to go. They are foreign deposits, not damage to the lens coating. They are slightly raised. I have tried the following chemicals and they won't budge:
-Isopropanol
-Acetone
-Vinegar
-Ammonia
At this point I'm looking for more ideas for chemicals I could safely use on lens coatings. I don't expect anyone to know what the heck these white dots are.
 _________________ Mike Deep Photography
Olympus: 21/3.5, 24/2.8 MC, 50/2, 50/1.4 MC, 135/2.8 MC
Nikon: C 24/2.8, C 28/2, Ai-S 28/2.8, K 35/2, K 35/2.8, C 55/1.2, AI 85/2, P 105/2.5 (5/3), 105/2.5 (5/4), F 135/2.8, Ai-S 180/2.8, No. 5T
Pentax: M 50/1.4, Auto-Tak 55/2, SMC Tak 100/4
Vivitar: 50/1.4 (Cosina), S1 90/2.5 (Tokina), 2x Macro TC
Etc: Distagon 35/2.8, Yashica ML 50/1.4, CZJ Pancolar 50/2, Rollei-HFT Planar 50/1.8, Sears Auto 55mm f1.4, Canon FL 55/1.2, Tomioka Yashinon 55/1.2, Sigma 90/2.8, CZ Sonnar T* 135/2.8, Isco Gottingen 180/2.8 |
|
| Haut de page |
|
 |
kiddo
 Inscrit le: 29 Juin 2018 Messages: 1630
|
 Posté: Jeu Nov 20, 2025 12:49 am Sujet du message: |
|
 Posté: Jeu Nov 20, 2025 12:49 am Sujet du message: |
|
|
kiddo wrote:
try zippo fluid , you might have some luck |
|
| Haut de page |
|
 |
DConvert
 Inscrit le: 12 Juin 2010 Messages: 984 Localisation: Essex UK
|
 Posté: Jeu Nov 20, 2025 5:35 pm Sujet du message: |
|
 Posté: Jeu Nov 20, 2025 5:35 pm Sujet du message: |
|
|
DConvert wrote:
The chemicals you've already tried should work for most things.
If they don't work I'd be tempted to try scraping with wood or plastic - something significantly softer than glass yet rigid enough to allow a sideways force.
Good luck! |
|
| Haut de page |
|
 |
Mike Deep
 Inscrit le: 25 Oct 2008 Messages: 447 Localisation: Upstate New York
|
 Posté: Jeu Nov 20, 2025 8:38 pm Sujet du message: |
|
 Posté: Jeu Nov 20, 2025 8:38 pm Sujet du message: |
|
|
Mike Deep wrote:
Okay strange results. Attempting to pick at it with a plastic spudger (And isopropanol for lube) didn't work. Hitting it with naptha-based lighter fluid dissolved... something? The dots got smaller, and something followed the flow of the naptha and dried out on the lens. I had to chase it with more naptha and quickly follow up with isopropanol before it dried again. Follow up passes with naptha won't touch the remainder.
Can anyone sound off on trying mineral spirits? I imagine MEK is a no-go. _________________ Mike Deep Photography
Olympus: 21/3.5, 24/2.8 MC, 50/2, 50/1.4 MC, 135/2.8 MC
Nikon: C 24/2.8, C 28/2, Ai-S 28/2.8, K 35/2, K 35/2.8, C 55/1.2, AI 85/2, P 105/2.5 (5/3), 105/2.5 (5/4), F 135/2.8, Ai-S 180/2.8, No. 5T
Pentax: M 50/1.4, Auto-Tak 55/2, SMC Tak 100/4
Vivitar: 50/1.4 (Cosina), S1 90/2.5 (Tokina), 2x Macro TC
Etc: Distagon 35/2.8, Yashica ML 50/1.4, CZJ Pancolar 50/2, Rollei-HFT Planar 50/1.8, Sears Auto 55mm f1.4, Canon FL 55/1.2, Tomioka Yashinon 55/1.2, Sigma 90/2.8, CZ Sonnar T* 135/2.8, Isco Gottingen 180/2.8 |
|
| Haut de page |
|
 |
DConvert
 Inscrit le: 12 Juin 2010 Messages: 984 Localisation: Essex UK
|
 Posté: Jeu Nov 20, 2025 11:24 pm Sujet du message: |
|
 Posté: Jeu Nov 20, 2025 11:24 pm Sujet du message: |
|
|
DConvert wrote:
| Mike Deep a écrit: |
Okay strange results. Attempting to pick at it with a plastic spudger (And isopropanol for lube) didn't work. Hitting it with naptha-based lighter fluid dissolved... something? The dots got smaller, and something followed the flow of the naptha and dried out on the lens. I had to chase it with more naptha and quickly follow up with isopropanol before it dried again. Follow up passes with naptha won't touch the remainder.
Can anyone sound off on trying mineral spirits? I imagine MEK is a no-go. |
MEK would be very similar to acetone, just a bit less volatile.
If naphtha has done something you could try toluene, aromatics typically have the best solvency of hydrocarbons, and toluene is the least volatile of those (other than the highly carcinogenic benzene). |
|
| Haut de page |
|
 |
monopix
Inscrit le: 07 Fév 2010 Messages: 49
|
 Posté: Sam Nov 22, 2025 9:55 pm Sujet du message: |
|
 Posté: Sam Nov 22, 2025 9:55 pm Sujet du message: |
|
|
monopix wrote:
This may sound stupid but have you tried water? Maybe with a mild detergent? You seem to be going for solvents but sometimes just water or a detergent is better. |
|
| Haut de page |
|
 |
visualopsins
 Inscrit le: 05 Mar 2009 Messages: 11700 Localisation: California
Expire: 2027-07-11
|
 Posté: Mar Nov 25, 2025 9:36 pm Sujet du message: |
|
 Posté: Mar Nov 25, 2025 9:36 pm Sujet du message: |
|
|
visualopsins wrote:
| monopix a écrit: |
| This may sound stupid but have you tried water? Maybe with a mild detergent? You seem to be going for solvents but sometimes just water or a detergent is better. |
+1  _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Haut de page |
|
 |
DConvert
 Inscrit le: 12 Juin 2010 Messages: 984 Localisation: Essex UK
|
 Posté: Mar Nov 25, 2025 10:20 pm Sujet du message: |
|
 Posté: Mar Nov 25, 2025 10:20 pm Sujet du message: |
|
|
DConvert wrote:
| monopix a écrit: |
| This may sound stupid but have you tried water? Maybe with a mild detergent? You seem to be going for solvents but sometimes just water or a detergent is better. |
Water is a very effective solvent for many inorganic compounds, but it often leaves deposits. I'd recommend rinsing with a little distilled water & then an alcohol if you use it. |
|
| Haut de page |
|
 |
kds315*
 Inscrit le: 12 Mar 2008 Messages: 16912 Localisation: Kehl, Germany
Expire: 2021-03-09
|
 Posté: Mer Nov 26, 2025 7:26 am Sujet du message: |
|
 Posté: Mer Nov 26, 2025 7:26 am Sujet du message: |
|
|
kds315* wrote:
Why even try to remove, should be irrelevant for IQ. Just reduction of contrast by a tiny bit... _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Haut de page |
|
 |
xkaes
 Inscrit le: 28 Oct 2019 Messages: 177 Localisation: Colorado
|
 Posté: Mer Nov 26, 2025 2:47 pm Sujet du message: |
|
 Posté: Mer Nov 26, 2025 2:47 pm Sujet du message: |
|
|
xkaes wrote:
A closer photo would reveal it it's fungus -- which I doubt. I suspect it's something like paint -- which would be difficult to remove without damaging the coating. But as pointed out, those aren't going to make any difference anyway. We all have dust in our lenses, and this is about the same. |
|
| Haut de page |
|
 |
RokkorDoctor
 Inscrit le: 27 Nov 2021 Messages: 1562 Localisation: Kent, UK
Expire: 2025-05-01
|
 Posté: Jeu Nov 27, 2025 2:22 pm Sujet du message: |
|
 Posté: Jeu Nov 27, 2025 2:22 pm Sujet du message: |
|
|
RokkorDoctor wrote:
Some spots also appear to be on the mount.
Could well be paint as xkaes already suggested, or something more nasty if the lens was used in reverse for macro photography and exposed to some mishap.
The worst damage I can imagine would be close-up photography of a cut-off grinding disk working on metal. If not protected, that rain of molten metal grinding sparks literally melt themselves onto/into ceramics glaze & glass surfaces, although generally I wouldn't expect them to be white. _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| Haut de page |
|
 |
Mike Deep
 Inscrit le: 25 Oct 2008 Messages: 447 Localisation: Upstate New York
|
 Posté: Jeu Nov 27, 2025 7:32 pm Sujet du message: |
|
 Posté: Jeu Nov 27, 2025 7:32 pm Sujet du message: |
|
|
Mike Deep wrote:
I think this has reached a conclusion. On closer inspection, I believe whatever the naptha dissolved had also pitted the lens coating, so the dots were still there, but fainter.
As for why I'm bothering, I know these wouldn't affect photos, but I'm trying to hold my refurbishments to a higher standard, as it's one of the few things I can work on in my current condition (quadrapelic, though functionality paraplegic now). _________________ Mike Deep Photography
Olympus: 21/3.5, 24/2.8 MC, 50/2, 50/1.4 MC, 135/2.8 MC
Nikon: C 24/2.8, C 28/2, Ai-S 28/2.8, K 35/2, K 35/2.8, C 55/1.2, AI 85/2, P 105/2.5 (5/3), 105/2.5 (5/4), F 135/2.8, Ai-S 180/2.8, No. 5T
Pentax: M 50/1.4, Auto-Tak 55/2, SMC Tak 100/4
Vivitar: 50/1.4 (Cosina), S1 90/2.5 (Tokina), 2x Macro TC
Etc: Distagon 35/2.8, Yashica ML 50/1.4, CZJ Pancolar 50/2, Rollei-HFT Planar 50/1.8, Sears Auto 55mm f1.4, Canon FL 55/1.2, Tomioka Yashinon 55/1.2, Sigma 90/2.8, CZ Sonnar T* 135/2.8, Isco Gottingen 180/2.8 |
|
| Haut de page |
|
 |
BrianSVP
 Inscrit le: 09 Juin 2023 Messages: 664 Localisation: Philadelphia
|
 Posté: Mar Déc 16, 2025 2:06 pm Sujet du message: |
|
 Posté: Mar Déc 16, 2025 2:06 pm Sujet du message: |
|
|
BrianSVP wrote:
Late to the party here, but those spots are indeed fungus etching. The pits form at the origin point/center of the fungal colony.
Super common on these flat-backed Tomioka lenses. For some reason, the Cosinons and Mamiya/Sekors seem more prone to it than other brands. Guessing it has to do with the coatings used. |
|
| Haut de page |
|
 |
|
|