MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Focus Rail for "Macro"
Voir le sujet précédent :: Voir le sujet suivant  


Reply



Got lucky at a local flea market and scored this for the $5.00 shown on the price tag.
Everything seems to be there, except an adapter to tripod plate.



Accura branded and made in Japan.



It will mount on a tripod head like this, but there is no clearance for the control wheels~ they bind on the plate without an adapter.



The ball and socket extension I used here was a little too light duty. It gave the required clearance, but took a lot of force to lock the ball.



Much better with the Manfrotto/Pro-Source 3/8" to 1/4" thread size adapter.




Taken with the 200mm Micro-Nikkor and PK-13 extension tube shown on the F2.





Successive crops showing the value of such fine focus control.
I am very impressed with this performance, and should really consider a modern focusing rail, which can be had for about $75.00

-D.S.


Dernière modification par Doc Sharptail le Ven Nov 20, 2026 1:30 pm ; modifié 1 fois au total


Reply

Nice find for $5. At that kind of magnification, any flex between the rail and the head shows up as blur, so a solid 3/8" adapter plate like the one you used is the right call. I'd also let the setup settle for a few seconds after each focus turn, and use a 2-second timer or remote release to avoid shake. There's a good tripod stability checklist on best-tripod.com if you ever want to compare heads and plates.


Reply

tripodnotes a écrit:
Nice find for $5. At that kind of magnification, any flex between the rail and the head shows up as blur, so a solid 3/8" adapter plate like the one you used is the right call. I'd also let the setup settle for a few seconds after each focus turn, and use a 2-second timer or remote release to avoid shake. There's a good tripod stability checklist on best-tripod.com if you ever want to compare heads and plates.


tripodnotes,

Please note promoting your website every post and reply is quickly approaching spam levels and is bumping into MFlenses rules against advertising or sales in any sub-forum other than Marketplace.

visualopsins