MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

B&W procesing tools and more
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello all,

First I would like to ask here if there is anyone who has for sale a "Photographic Graduate" for measuring quantity of liquid substaces (something like this one http://ecx.images-amazon.com/images/I/21A5CW1JJDL._SL160_AA160_.jpg - a 150ml one would be ok).

For developing Ilford ID-11 would be ok ? (I saw in a article that its ok using it with many kind of films). Or Kodak D-76?

Thank you very much .


Reply

montecarlo a écrit:

First I would like to ask here if there is anyone who has for sale a "Photographic Graduate" for measuring quantity of liquid substaces (something like this one http://ecx.images-amazon.com/images/I/21A5CW1JJDL._SL160_AA160_.jpg - a 150ml one would be ok).


There is nothing photographically specific about it. Its a standard piece of laboratory equipment, called a 'measuring cylinder'. For example:

Cliquez ici pour voir sur Ebay



Reply

Cosmin, 150ml is too small for the amount of liquid needed for one roll of film. 135 film needs 300ml and 120 needs 500ml. A 600ml cylinder is much more useful.

If you want to use one of the highly concentrated liquid developers like DD-X you'll need to measure a small quantity and the larger cylinders aren't accurate enough. One about 50ml would be much better.

With ID-11 you first have to make the full 1 litre of the "stock" developer with the two packs of powders and warm water, so you'll need a graduated 1 litre container. Then when it's cooled you mix the "stock" with cooler water to make the quantity of working solution at the dilution you need.

Here's the ID-11 factsheet from the Ilford site:
http://www.ilfordphoto.com/Webfiles/200621612182416.pdf
Page 6 lists the times for developing non-Ilford films.


Reply

Hello and thank you.

I was thinking for a 150ml one because it would be more precise than a bigger one although not so precise like a 50ml one.

Thanks again.