MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Macro-Takumar 50mm f/4
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Anyone taken apart a Macro-Takumar 50mm f/4? How the heck do you get the glasses out? Do I really have to dismantle the whole thing? Sad


Reply

You probably need to start by unscrewing the label ring round the front lens (includes the black cone round the glass) using a friction "screwdriver" - a piece of rubber. Wearing houshold gloves helps a lot too.


Reply

peterqd a écrit:
You probably need to start by unscrewing the label ring round the front lens (includes the black cone round the glass) using a friction "screwdriver" - a piece of rubber. Wearing houshold gloves helps a lot too.


Yeah I removed that. And then there is a ring on the top glas. The ring has 2 holes. Inside of it, there is a inner ring, a normal lock ring for elements. But removing the inner ring will not let me get to the glass in the back.

Seem I have to take the whole thing apart to get to the back glass. There is a cap I need to remove from the back element, but that can't be removed unless I take the lens apart completly. :%