MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

m42 TO EOS ADAPTER
Voir le sujet précédent :: Voir le sujet suivant  


Reply

When using the above adapter (without chip) on eos digicams I have no problem but when mounting same on my eos 50e film camera with appropriate lens and press the shutter button - the camera locks up.
Any ideas??????????


Reply

I remember this issue having already turned out here or on another forum.
As far as I can remember there is a pin in the mount that needs to be pressed in order that the lens would be recognized as a genuine EF. Have a look, if I'm right try blocking it with a small piece of scotch tape.

Cheers, M.


Reply

Yes, the EOS 50e needs a confirmation that an EF lens is mounted, otherwise it looks up.


Reply

Marty, where is the pin exactly?

And do I really need an adapter with a chip to work successfully on the 50e?


Reply

Found the thread on another forum: http://forum.manualfocus.org/viewtopic.php?id=14924. The switch is at 10 o'clock and has to stay OPEN for the camera to operate properly. The chip should solve the problem either according to them.

Cheers, M.


Reply

I have the 50 (non E) and it is fine with my adapters. As is 620.


Reply

Just sent for a BIG-IS chipped adapter for my eos cameras, hope that this solves the problem


Reply

My recently arrived chipped adapter from Big-is works fine with all of the eos cameras. Many thanks for all advise