MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Minolta XD7 diaphragm coupling ring problems.
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I`ve received a very nice and fully working Minolta XD7 and noticed that the ring that is responsible for the diaphragm coupling is not moving freely as it should . I first fought that the problem was in the spring. I`ve checked it ,but everything was OK. The ring moved very nicely without the mount. Put everything together, but the problem remained. I noticed that when I partly unscrew the mount ring the ring starts moving as it should but also does the mount. I`m stumped and do not know where might the problem be. Any of you have some ideas?


Reply

This isn't exactly XD-7, but it might help ?

http://dl.dropboxusercontent.com/u/9828489/minolta_xd-11_service.pdf

I've got a couple of XD-7's and I'm sure I've got the right service manual somewhere, but it could be on a different computer. Confused

maybe here as well?

http://reptron.dyndns.org/MinoltaSLRs/links.html

There's nothing on that link, I've just looked again, but some of the other stuff might be interesting. I've found the link I had to the XD-7 repair and service manual, but it's a link to buy it -

http://www.uscamera.com/x700sm.htm





.


Reply

I did have a look at the XD-11 repair guide, but there is no info there. This problem is somewhat unusual cause it`s not one of the common issues that Minolta cameras have, a.k.a non electrical issue. I did dismantle my X-700 to see if there might be some part that is missing from my XD7, but everything is present. As far as I know the problem is that the lens mount, when it is screwed in tightly, restricts the movement of the coupling ring.