MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

MIR 38B Focus Issue
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Good day!

This is my very first post here, the best par of the forum I could think to post this. I tried to search, but it returned a 404..

Well, here goes. I recently bought a MIR 38B, and a tilt adapter for use on my 7D, The lens fits just fine in there, and seems sharp, but I quickly noticed there was a slight issue with focusing. The lens markings are 0.5m to infinity, but my lens doesn't work like that. It rather focuses from 0.3m to 5-6m tops. Does anyone have a clue what may be causing this?

The lens and adapter both are P6, fits together perfectly.

Thanks!

EDIT:

I just thought of register/flange distances. A little googling showed Canon EF to be 44mm, and P6 to 74.1mm. I measured the adapter and got 77.5mm from sensor to P6 flange. Could this be the problem?


Reply

kolruds a écrit:
I just thought of register/flange distances. A little googling showed Canon EF to be 44mm, and P6 to 74.1mm. I measured the adapter and got 77.5mm from sensor to P6 flange. Could this be the problem?


Certainly. In fact with such a large difference (77.5 - 74.1 = 3.4 mm) I would expect the maximum focus distance to be not much more than 1 m.

Nice lens BTW.


Reply

Morrn da!
And welcome to this interesting forum!
What other adapters do you have and/or plan to obtain?

An M42-adapter is the first that comes to mind.


Reply

sichko a écrit:


Certainly. In fact with such a large difference (77.5 - 74.1 = 3.4 mm) I would expect the maximum focus distance to be not much more than 1 m.

Nice lens BTW.


Ok, thanks. I do not have the best to measure completely accurate, but I estimate + - margins that it is 3 mm.

Twinquarts;

Thanks! I already bought a cheap m42 converter, but no lens yet, on the to do list Wink