| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
squishy
Inscrit le: 08 Mai 2011 Messages: 3 Localisation: United Kingdom
|
 Posté: Mar Jan 03, 2012 4:33 pm Sujet du message: PK - EOS adaptors |
|
 Posté: Mar Jan 03, 2012 4:33 pm Sujet du message: PK - EOS adaptors |
|
|
squishy wrote:
My dad has passed on his PK lenses to me since he hasn't used his MX in years, and I've decided I'd like to use them on my 40D (they're nothing special, just a cosina 24mm f/2.8 and a pentax SMC 50mm f/1.7, but I know they can both produce excellent image quality on my DSLR (see below)).
So about a year ago I ordered an AF confirm adaptor off ebay after doing some research, but when it arrived I hit a problem. The adaptor mounted the lenses offset from their normal position, between 1 and 2 o'clock I'd estimate. This meant the aperture leaver happened to get caught on a small corner of metal within the body, which prevented me stopping down more than a stop. I could get it to work fine by not mounting the adaptor all the way past the click, but leave it turned as far as it would go without catching the leaver. But this just wasn't secure enough to use properly so I contacted the seller and returned the adaptor.
Now I've just come across the lenses again and I still fancy using them, since I don't have any short primes and the test shots I took when I briefly had the adaptor showed lovely image quality.
So my question is, can anyone recommend a particular adaptor that they can confirm will work and not have the same problem?
I know the obvious answer is a "lever-ectomy", but my dad would prefer if I could keep the lenses in perfect working order.
Thank you for your time |
|
| Haut de page |
|
 |
squishy
Inscrit le: 08 Mai 2011 Messages: 3 Localisation: United Kingdom
|
 Posté: Lun Jan 16, 2012 7:02 pm Sujet du message: |
|
 Posté: Lun Jan 16, 2012 7:02 pm Sujet du message: |
|
|
squishy wrote:
Guess I'll just buy a different one and hope I don't encounter the problem again then. |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Lun Jan 16, 2012 9:45 pm Sujet du message: Re: PK - EOS adaptors |
|
 Posté: Lun Jan 16, 2012 9:45 pm Sujet du message: Re: PK - EOS adaptors |
|
|
peterqd wrote:
| squishy a écrit: |
My dad has passed on his PK lenses to me since he hasn't used his MX in years, and I've decided I'd like to use them on my 40D (they're nothing special, just a cosina 24mm f/2.8 and a pentax SMC 50mm f/1.7, but I know they can both produce excellent image quality on my DSLR (see below)).
So about a year ago I ordered an AF confirm adaptor off ebay after doing some research, but when it arrived I hit a problem. The adaptor mounted the lenses offset from their normal position, between 1 and 2 o'clock I'd estimate. This meant the aperture leaver happened to get caught on a small corner of metal within the body, which prevented me stopping down more than a stop. I could get it to work fine by not mounting the adaptor all the way past the click, but leave it turned as far as it would go without catching the leaver. But this just wasn't secure enough to use properly so I contacted the seller and returned the adaptor.
Now I've just come across the lenses again and I still fancy using them, since I don't have any short primes and the test shots I took when I briefly had the adaptor showed lovely image quality.
So my question is, can anyone recommend a particular adaptor that they can confirm will work and not have the same problem?
I know the obvious answer is a "lever-ectomy", but my dad would prefer if I could keep the lenses in perfect working order.
Thank you for your time |
Hi squishy, welcome to the forum and I'm so sorry you didn't get a reply earlier. We try to make sure no posts are left unanswered but this one slipped through somehow.
PK > EOS adapters always mount the lenses non-vertical. This is unavoidable due to a conflict of the positions of the PK and EOS bayonet recesses and projections. However you shouldn't have problems with the aperture ring. My adapter works fine on my 400D. However, it doesn't have an AF chip, maybe that's the reason. I bought it from Roxsen, but Big_Is is another respected seller. _________________ Peter - Moderator |
|
| Haut de page |
|
 |
ManualFocus-G
 Inscrit le: 29 Déc 2008 Messages: 6675 Localisation: United Kingdom
Expire: 2014-11-24
|
 Posté: Lun Jan 16, 2012 9:54 pm Sujet du message: |
|
 Posté: Lun Jan 16, 2012 9:54 pm Sujet du message: |
|
|
ManualFocus-G wrote:
I have just a cheapo one from big_is (I believe) which works fine (on a crop Canon) as well. No AF confirm though. _________________ Graham
Shooter of choice: Nikon Z6
Lenses:
Vivitar presets
Soligor autos
Pentacon presets
Prakticar PBs
Some other weird stuff!
|
|
| Haut de page |
|
 |
squishy
Inscrit le: 08 Mai 2011 Messages: 3 Localisation: United Kingdom
|
 Posté: Lun Jan 16, 2012 10:34 pm Sujet du message: |
|
 Posté: Lun Jan 16, 2012 10:34 pm Sujet du message: |
|
|
squishy wrote:
Thanks guys, I didn't mean my earlier post to sound as spiteful as it seems to have come out
Thanks for the help, but can I just check Graham, what bodies exactly have you used the adaptor on?
Peterqd, I've been looking at some pictures of the 400D mount, and it doesn't have a little corner of metal in the same place as the 40D inside the body where the aperture leaver was catching on mine.
Might seem silly to put so scrutiny into a cheap item like this, but buying and returning from hong kong and china and ebay where 90% of the adaptors seem to be sold from ends up taking weeks, saves me trouble to be sure now. |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Mar Jan 17, 2012 12:53 am Sujet du message: |
|
 Posté: Mar Jan 17, 2012 12:53 am Sujet du message: |
|
|
peterqd wrote:
| squishy a écrit: |
| Peterqd, I've been looking at some pictures of the 400D mount, and it doesn't have a little corner of metal in the same place as the 40D inside the body where the aperture leaver was catching on mine. |
I've read about that somewhere, but I didn't take a lot of notice as it didn't concern my camera. I think there's an answer, I'll see if I can find it. You could try emailing big_is about it, he's very knowledgable and helpful.
http://stores.ebay.co.uk/big-is-camera _________________ Peter - Moderator |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|