MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Please Help Identify Lens Adapter
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!






Dernière modification par lcostet le Jeu Oct 17, 2013 10:41 am ; modifié 1 fois au total


Reply

lcostet a écrit:
I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!






First post images won't appear - antispam measure.


Reply

lcostet a écrit:
I would really appreciate some help identifying this adapter. I believe it is a Komura Unidapter for a Nikon F body, as it has the Nikon F bayonet mount, it is marked UNI. Made in Japan, and is similar to a T-mount, but is a 47mm screw mount. However, it is different in appearance from a Unidapter System mount (for Canon) that I have on a Komura 105mm f/2.5 preset. And what does the N.M marking stand for? (The old Miranda adapters were marked N.M but they had a 44mm diameter.) The first photo below is the Komura Unidapter, and the next three are the unknown adapter. Thanks for any help!





It looks the Nikon F adapter will fit my 4/24. Can you put the Nikon F adapter to your lens?


Reply

I have reposted and images are live now.

calvin83 - well that's just it...the Unidapter on the Komura is attached with little screws and looks to be a little involved to remove...not at all like the unknown adapter which is a screw on mount.


Reply

lcostet a écrit:
I have reposted and images are live now.

calvin83 - well that's just it...the Unidapter on the Komura is attached with little screws and looks to be a little involved to remove...not at all like the unknown adapter which is a screw on mount.

Have you ever tired to unscrew the mount? No screw is required. The 47mm UNI adapter on My Komura 4/24 can be screw off easily like T mount lens.