MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

reverse lens FL inquiry.
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I purchased a Schneider Componon S 180mm 5.6 to play around with and the only way I could mount it right away was reversed. I have ordered an adapter to fit the correct way but in the meantime I am using it reversed. My Sony a7Rii has steady shot which wants a FL input for the lens. Anybody know what the FL is in the reversed oreintation? Or how to calculate it?


Reply

The FL is the same, no matter the orientation!


Reply

jamaeolus a écrit:
My Sony a7Rii has steady shot which wants a FL input for the lens.


For closer higher magnifications, steady shot setting should be increased imho.

Gerald a écrit:
The FL is the same, no matter the orientation!


Quite true! Smile However, back focus can and often does change, hence the difference is focus distances.


Reply

jamaeolus a écrit:
I purchased a Schneider Componon S 180mm 5.6 to play around with and the only way I could mount it right away was reversed. I have ordered an adapter to fit the correct way but in the meantime I am using it reversed. My Sony a7Rii has steady shot which wants a FL input for the lens. Anybody know what the FL is in the reversed oreintation? Or how to calculate it?


With a digital body like the A7Rii you don't have to worry about film cost, so I would suggest to experiment and try which FL works best at the magnification you are using the lens.


Reply

visualopsins a écrit:
Gerald a écrit:
The FL is the same, no matter the orientation!


Quite true! Smile However, back focus can and often does change, hence the difference is focus distances.


For macro photography an IS system needs to be a 5-axis IBIS type to be effective. With a native lens, in addition to the information sent by the sensors (Yaw, Pitch, Roll, X and Y), the camera's computer knows the focal length AND focus distance. That is, the camera's computer has all the information it needs to do an excellent job of image stabilization.

Things get a little more complicated with an adapted lens. The photographer can manually enter the focal length, but not the focus distance. So, I believe that with adapted lenses, the IS system of existing cameras drops to 3-axis image stabilization mode, which works great for infinity shots, but not so well for macro photography.